8 Initialization of on-line mode 3
Initialization of operation mode 3, designed to obtain starting values for complex problems, is relatively simple. It involves the following steps.
1. Prepare the .EXE file for the on-line optimization as described in Section 1.3.
2. Prepare the input files <initials.dat> and <svalues.dat> for cycle one as described in Section 1.5.1.
3. Select “Sequential optimization” mode in the on-line options submenu (Fig. 1).
4. Specify the cycle time in the options menu submenu (Fig. 1).
5. Click “Run” on the on-line menu and select the prepared .EXE file from the open file dialog box.
|
